Reference Guide

Usage Information You can partition the LPM table to store extended IPv6 route prefixes with /65
to /128 mask lengths. LPM CAM partitioning requires a switch reload to take effect.
To disable LPM CAM partitioning and return the number of the IPv6 /65-/128 route
prefixes stored in Partition 1 to 0, enter the no cam-ipv6 extended-prefix
command.
clear ipv6 fib
Clear (refresh) all forwarding information base (FIB) entries on a line card.
C9000 Series
Syntax
clear ipv6 fib {linecard slot-id } vrf vrf-name
Parameters
vrf vrf–name (Optional) Enter the keyword vrf followed by the name of
the VRF to clear the neighbor corresponding to that VRF.
NOTE: If you do not specify this option, neighbors
corresponding to the default VRF are cleared.
linecard slot Enter the slot number to clear the FIB for a linecard. Range
is 0 to 11.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.1) Introduced on the S3048-ON.
9.7(0.1) Introduced on the S4048-ON.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series TeraScale.
IPv6 Basics
1185