Users Guide

Configure the Overload Bit for a Startup Scenario
For information about setting the router overload bit for a specific period of time after a switch reload is implemented, refer to
the Intermediate System to Intermediate System (IS-IS) section in the Dell Networking OS Command Line Reference Guide.
Viewing Files
You can only view file information and content on local file systems.
To view a list of files or the contents of a file, use the following commands.
• View a list of files on the internal flash.
EXEC Privilege mode
dir flash:
• View the contents of a file in the internal flash.
EXEC Privilege mode
show file flash://filename
• View a list of files on an external flash.
EXEC Privilege mode
dir usbflash:
• View the running-configuration.
EXEC Privilege mode
show running-config
• View the startup-configuration.
EXEC Privilege mode
show startup-config
Example of the dir Command
The output of the dir command also shows the read/write privileges, size (in bytes), and date of modification for each file.
Dell# dir
Directory of flash:
1 drwx 4096 Jan 01 1980 00:00:00 +00:00 .
2 drwx 2380 Sep 30 2015 16:59:51 +00:00 ..
3 drwx 4096 May 20 2015 10:45:42 +00:00 TRACE_LOG_DIR
4 drwx 4096 May 20 2015 10:45:42 +00:00 CONFD_LOG_DIR
5 drwx 12288 May 20 2015 10:45:42 +00:00 CRASH_LOG_DIR
6 drwx 28672 May 20 2015 10:45:42 +00:00 CORE_DUMP_DIR
7 drwx 4096 May 20 2015 10:45:42 +00:00 DEFAULT_DIAG_REPORT_DIR
8 d--- 4096 May 20 2015 10:45:44 +00:00 ADMIN_DIR
9 drwx 4096 May 20 2015 10:45:44 +00:00 RUNTIME_PATCH_DIR
10 -rwx 23495 May 21 2015 10:53:00 +00:00 0521_6unit.cfg
11 -rwx 25350 May 20 2015 16:22:44 +00:00 0520_6unit.cfg
12 -rwx 33901 Jul 29 2015 01:48:08 +00:00 backup1
13 -rwx 32267 Aug 07 2015 14:45:26 +00:00 startup-config.bak
Getting Started 52