Users Guide

PFC DCBx Oper status is Up
State Machine Type is Feature
TLV Tx Status is enabled
PFC Link Delay 45556 pause quantams
Application Priority TLV Parameters :
--------------------------------------
FCOE TLV Tx Status is disabled
ISCSI TLV Tx Status is disabled
Local FCOE PriorityMap is 0x8
Local ISCSI PriorityMap is 0x10
Remote FCOE PriorityMap is 0x8
Remote ISCSI PriorityMap is 0x8
Dell# show interfaces tengigabitethernet 1/4 pfc detail
Interface TenGigabitEthernet 1/4
Admin mode is on
Admin is enabled
Remote is enabled
Remote Willing Status is enabled
Local is enabled
Oper status is recommended
PFC DCBx Oper status is Up
State Machine Type is Feature
TLV Tx Status is enabled
PFC Link Delay 45556 pause quanta
Application Priority TLV Parameters :
--------------------------------------
FCOE TLV Tx Status is disabled
ISCSI TLV Tx Status is disabled
Local FCOE PriorityMap is 0x8
Local ISCSI PriorityMap is 0x10
Remote FCOE PriorityMap is 0x8
Remote ISCSI PriorityMap is 0x8
0 Input TLV pkts, 1 Output TLV pkts, 0 Error pkts, 0 Pause Tx pkts, 0 Pause Rx pkts
The following table describes the show interface pfc summary command fields.
Table 20. show interface pfc summary Command Description
Fields Description
Interface Interface type with stack-unit, linecard, and port number.
Admin mode is on; Admin is enabled PFC Admin mode is on or off with a list of the configured
PFC priorities . When PFC admin mode is on, PFC
advertisements are enabled to be sent and received from
peers; received PFC configuration takes effect. The admin
operational status for a DCBx exchange of PFC
configuration is enabled or disabled.
Remote is enabled; Priority list Remote Willing Status is enabled Operational status (enabled or disabled) of peer device for
DCBx exchange of PFC configuration with a list of the
configured PFC priorities. Willing status of peer device for
DCBx exchange (Willing bit received in PFC TLV): enabled or
disabled.
Local is enabled DCBx operational status (enabled or disabled) with a list of
the configured PFC priorities
Operational status (local port) DCBx operational status (enabled or disabled) with a list of
the configured PFC priorities.
Port state for current operational PFC configuration:
• Init: Local PFC configuration parameters were
exchanged with peer.
Data Center Bridging (DCB) 271