Users Guide

Power Reserved for inline Power: 1612W
Total Inline Power Consumed: 21W
Remaining inline power Available: 1580W
Power Management Mode: Class
Interface Inline Power Inline Power Class Device PoE Port LLDP
Max / Alloc Consumed Type Priority Support
(Watts) (Watts)
------------- ------------ ------------ ------- ------ -------- ------
PeGi 255/0/1 30.00/21.40 21.50 4 2 low 0
Example of Configuring Port Extender Interfaces with a Maximum Power of 15000 and 5000 mW
The following example sets the maximum allocated power to 15000 mW on interface peGigE 0/0/1 and
5000 mW on interface peGigE 0/0/2 interface peGigE 0/0/3 is not configured. The default value of 30000
mW is the maximum power that you can allocate to a device.
This configuration has the following PoE topology:
Figure 112. PoE Topology
Dell(conf)#interface peGigE 0/0/1
Dell(conf-if-pegi-0/0/1)#power inline
Dell(conf)#interface peGigE 0/0/2
Dell(conf-if-pegi-0/0/2)#power inline 15000
Dell(conf)#interface peGigE 0/0/3
Dell(conf-if-pegi-0/0/3)#power inline 5000
Power over Ethernet (PoE) 879