Users Guide

Topics:
• Configure GVRP
• Enabling GVRP Globally
• Enabling GVRP on a Layer 2 Interface
• Configure GVRP Registration
• Configure a GARP Timer
Configure GVRP
To begin, enable GVRP.
To facilitate GVRP communications, enable GVRP globally on each switch. GVRP configuration is per
interface on a switch-by-switch basis. Enable GVRP on each port that connects to a switch where you want
GVRP information exchanged. In the following example, GVRP is configured on VLAN trunk ports.
Figure 41. Global GVRP Configuration Example
GARP VLAN Registration Protocol (GVRP) 464