Users Guide

22 23 0 0 0 0
0
23 24 0 0 0 0
0
24 25 0 0 0 0
0
28 29 0 0 0 0
0
32 33 0 0 0 0
0
36 37 0 0 0 0
0
40 41 0 0 0 0
0
44 45 0 0 0 0
0
Internal 50 0 0 0 0
0
Internal 51 0 0 0 0
0
Internal 52 0 0 0 0
0
Internal 53 0 0 0 0
0
Internal 54 0 0 0 0
0
Internal 55 0 0 0 0
0
Internal 56 0 0 0 0
0
Internal 57 0 0 0 0
0
Internal 58 0 0 0 0
0
Internal 59 0 0 0 0
0
Internal 60 0 0 0 0
0
Internal 61 0 0 0 0
0
Displaying Dataplane Statistics
The show hardware linecard {0–2} cpu data-plane statistics command provides information
about the packet types entering a line-card CPU.
As shown in the following example, the show hardware linecard cpu data-plane statistics
command output provides detailed RX/TX packet statistics on a per-queue basis. The output allows you to
verify if CPU-bound traffic is internal (so-called party bus or IPC traffic) or network control traffic, which the
CPU must process.
To display input and output statistics on the party bus, which carries inter-process communication traffic
between CPUs use the show hardware party-bus port {{0-7}|all} statistics command.
Dell#show hardware linecard 2 cpu data-plane statistics
HANSKVILLE Mib Counters:
TR 64 byte frames = 3
TR 127 byte frames = 358
Debugging and Diagnostics 384