Users Guide

• The IP MTU configured on the physical interface determines how multiple nested encapsulated packets
are handled in a multipoint receive-only tunnel.
• Control-plane packets received on a multipoint receive-only tunnel are destined to the local IP address
and routed to the CPU after decapsulation. A response to these packets from the switch is only possible
if the route to the sender does not pass through a receive-only tunnel.
• Multipathing over more than one VLAN interface is not supported on packets routed through the tunnel
interface.
• IP tunnel interfaces are supported over ECMP paths to the next hop. ECMP paths over IP tunnel
interfaces are supported. ARP and neighbor resolution for the IP tunnel next-hop are supported.
Tunneling 1119