Reference Guide

Fabric OS Command Reference xxiii
53-1002921-02
What is new in this document
The Fabric OS Command Reference v7.2.0 supports the current Fabric OS release and the new
hardware platforms.
The Admin Domain and Virtual Fabric restrictions for Fabric OS commands table in the appendix
has been updated. The table lists the Admin domain, Context and Switch type for the commands.
New commands
The following commands and associated man pages have been added since the publication of the
Fabric OS v7.1.0 release of this manual:
• chassisCfgPerrThreshold - Configures parity error threshold and fault capability on a blade or a
switch.
• creditRecovMode - Enables credit loss recovery on back-end ports and time-out based credit
loss detection of Condor 2 front-end ports.
• fcrIclPathBWMonitor - Sets or displays FC Router ICL bandwidth calculation parameters for
EX_Ports.
• flow - Creates, manages and displays flows in Flow Vision.
• logicalGroup - Creates and manages groups of monitored elements.
• mapsConfig - Enables MAPS on a switch and sets global monitoring configurations.
• mapsDb - Displays or clears the dashboard showing an at-a-glance snapshot of switch health
status.
• mapsHelp - Displays MAPS command information.
• mapsPolicy - Creates and manages MAPS policies.
• mapsRule - Creates and manages monitoring rules.
• mapsSam - Generates or clears MAPS port availability monitor report.
• portCfgEportCredits - Configures normal distance E_Port buffer allocation.
• relayConfig - Sets and displays the relay host IP address.
Modified commands
The following commands and associated man pages have been modified to remove support for the
Brocade 8000 in Fabric OS v7.2.0:
• ag
• fcoe
• perfTTmon
• portCfgDefault
• portLedTest
• portLoopbackTest
• switchShow
• turboRamTest