Reference Guide

796 Fabric OS Command Reference
53-1002921-02
portDPortTest
2
Status: PASSED
===================================================================
Test Start time Result EST(HH:MM:SS) Comments
===================================================================
Electrical loopback 05:57:52 PASSED -------- ----------
Optical loopback 05:58:07 PASSED -------- ----------
Link traffic test 05:58:14 PASSED -------- ----------
====================================================================
Roundtrip link latency: 934 nano-seconds
Estimated cable distance: 1 meters
Buffers required: 1 (for 1024 byte frames at 16Gbps speed)
To display D_Port summary information:
switch:admin> portdporttest --show all 42
Port State SFP Capabilities Test Result
=============================================
24 ONLINE E,O PASSED
26 ONLINE E,O PASSSED
33 OFFLINE --- FAILED
To display the D_Port test results for a port when the test has failed:
switch:admin> portdporttest --show 3/20
D-Port Information:
===================
Slot: 3
Port: 20
Remote WWNN: 10:00:00:05:33:7e:69:c4
Remote port: 28
Mode: Manual
No. of test frames: 1 Million
Test frame size: 1024 Bytes
FEC (enabled/option/active): Yes/No/No
CR (enabled/option/active): Yes/No/No
Start time: Mon Apr 8 12:16:12 2013
End time: Mon Apr 8 12:16:29 2013
Status: FAILED
=================================================================
Test Start time Result EST(HH:MM:SS) Comments
=================================================================
Electrical loopback 12:16:13 PASSED -------- ----------
Optical loopback 12:16:18 PASSED -------- ----------
Link traffic test 12:16:29 FAILED -------- Remote port is not ready
to start the test
=================================================================
Roundtrip link latency: unknown
Failure report:
Remote port error(s): GENERIC, BAD_EOF, UNREACHABLE, SIGNAL_LOSS
Please use portstatsshow and porterrshow for more details on the above errors.
Refer to file /var/tmp/dport/slot3port20_stats.txt, for link statistics prior
\
to the port was set to D-Port.
SEE ALSO dataTypeShow, fabricLog, portCfg, portCfgDPort, portShow, switchShow