Reference Guide

330 Fabric OS Command Reference
53-1002921-02
fcrConfigure
2
After you identify the FCIP links between FC Routers for all fabrics and updated
the cost of all FCIP links, enable the shortest IFL mode in all the FC Routers in the
backbone fabric using this option. If the FCIP link is the only available path from
the source to the destination edge fabric, then traffic will flow through that FCIP
link only.
--disable -shortestifl
Disables the shortest IFL mode in FC Router.
--show
Shows the current Backbone Fabric ID and the status of the shortest IFL mode as
enabled or disabled.
--help
Displays the command usage.
EXAMPLES To configure FC Router parameters:
fcr:admin> fcrconfigure --bbfid
Backbone fabric ID parameter set. <cr> to skip this parameter
Please make sure new Backbone Fabric ID does \
not conflict with any configured EX-Port's Fabric ID
Backbone fabric ID: (1-128)[128]32
To enable shortest IFL mode:
fcr:admin> fcrconfigure --enable -shortestifl
Shortest IFL path is enabled.
To disable shortest IFL mode:
fcr:admin> fcrconfigure --disable -shortestifl
Shortest IFL path is disabled
To display the current configuration:
fcr:admin> fcrconfigure --show
Backbone fabric ID: 32
Shortest IFL feature is disabled
SEE ALSO fosConfig, switchDisable, switchEnable, switchShow, linkCost