Reference Guide

Fabric OS Command Reference 1083
53-1002921-02
switchShow
2
To display the output when any of the ICL links get disabled with no Enterprise ICL (EICL) license
installed:
• If no EICL license is installed and the number of ICL-connected chassis in the fabric is more than 4,
the port disable reason code displayed is, "No EICL License".
• If EICL license is installed and the number of ICL-connected chassis in the fabric exceeds 10, the
port disable reason code displayed is, "EICL License Limited".
switch:admin> switchshow
switchName: DCX_150
switchType: 120.3
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 6
switchId: fffc06
switchWwn: 10:00:00:05:1e:93:ff:00
zoning: OFF
switchBeacon: OFF
FC Router: OFF
Fabric Name: fabric
Allow XISL Use: OFF
LS Attributes: [FID: 128, Base Switch: No, Default Switch: Yes, Address Mode
0]
Index Slot Port Address Media Speed State Proto
=======================================================
0 1 0 050000 -- N8 No_Module FC
1 1 1 050100 -- N8 No_Module FC
2 1 2 050200 -- N8 No_Module FC
.....
398 5 14 ------ cu 8G No_Sync FC
399 5 15 ------ cu 8G No_Sync FC
400 5 16 ------ cu 8G In_Sync FC Disabled (No EICL License)
401 5 17 ------ cu 8G In_Sync FC Disabled (No EICL License)
402 5 18 ------ cu 8G In_Sync FC Disabled (No EICL License)
403 5 19 ------ cu 8G In_Sync FC Disabled (No EICL License)
404 5 20 ------ cu 8G In_Sync FC Disabled (No EICL License)
405 5 21 ------ cu 8G In_Sync FC Disabled (No EICL License)
406 5 22 ------ cu 8G In_Sync FC Disabled (No EICL License)
407 5 23 ------ cu 8G In_Sync FC Disabled (No EICL License)
.....
416 8 0 ------ cu 8G In_Sync FC E-Port
10:00:00:05:1e:4a:cb:00 "sw0" (upstream) \
(Trunk master)
417 8 1 ------ cu 8G In_Sync FC E-Port (Trunk port, master
is Slot 8 Port 0 )
418 8 2 ------ cu 8G In_Sync FC E-Port (Trunk port, master
is Slot 8 Port 0 )
419 8 3 ------ cu 8G In_Sync FC E-Port (Trunk port, master
is Slot 8 Port 0 )
420 8 4 ------ cu 8G In_Sync FC E-Port (Trunk port, master
is Slot 8 Port 0 )
To display the port status information on Condor3 Inter-Chassis Links (ICLs):
switch:admin> switchshow
switchName: ICL_DCX
switchType: 120.3
switchState: Online
switchMode: Native