Release Notes

Closed with Code Change Defects in Fabric OS v7.0.1
Fabric OS v7.0.1 Release Notes v1.0 Page 44 of 67
Defect ID: DEFECT000339701
Technical Severity: Medium
Summary: Even after removing the device from the LSAN zoning, nsinfo.html for switch is not updated
with removed devices.
Symptom: nsinfo.html may not be updated with devices that have been removed from an LSAN zone.
Feature: 8G FCR
Function: FCR Daemon
Probability: Medium
Found in Release: FOS6.4.2
Defect ID: DEFECT000342412
Technical Severity: Medium
Summary: TPERF session may not be able to be restarted until all user disabled GE ports on the test
tunnel are re-enabled.
Symptom: If a user disables GigE ports on a TPERF test tunnel while a TPERF session is in progress
and the TPERF session is subsequently terminated, TPERF may not be able to be restarted
until the disabled GigE ports are re-enabled.
When in this state, if the user attempts to re-start TPERF, they will get a message indicating
that a TPERF session is already in progress.
Feature: FCIP
Function: FCIP CLI
Probability: Low
Found in Release: FOS7.0.0
Defect ID: DEFECT000342738
Technical Severity: Medium
Summary: Enhancement to BE credit loss detection and recovery
Symptom: Previously, if backend credit is lost, the user needs to reseat the blade to recover. This
release added user configuration options to generate link reset, port re-init, or blade fault
upon detection of backend credit loss.
Feature: 8G ASIC Driver
Function: ASIC Driver
Probability: Low
Found in Release: FOS7.0.0
Where Else Fixed: FOS6.3.2 c, FOS6.4.2 a
Defect ID: DEFECT000345346
Technical Severity: Medium
Summary: For 16G platforms, configdefault may lead to an invalid port speed configuration state if
ports in the same group are in different logical switches.
Symptom: If configdefault is executed in the default switch, portcfgoctetspeedcombo settings will get
set to default on all logical switches.
Feature: ConfigMgmt
Function: Config Download
Probability: Medium
Found in Release: FOS7.0.0