User guide

NetXtreme II User Guide
September 2013
Broadcom Corporation
Page 244 Managing the Network Adapter Document INGSRVT78-CDUM100-R
VIEWING HARDWARE INFORMATION
The Hardware section of the Information tab displays information about the hardware settings for the selected network
adapter.
NOTE: Some information may not be available for all Broadcom network adapters.
Information Tab: Hardware
ASIC Version. The chip version of the Broadcom adapter (this information is not available for adapters made by others).
Bootcode Version. The version of the boot code. This information is only available for Broadcom NetXtreme II adapters.
Family Firmware Version. The global firmware version that represents all firmware on the device.
Management Firmware. The firmware version installed on the system.
Vendor ID. The vendor ID.
Device ID. The adapter ID.
Subsystem Vendor ID. The subsystem vendor ID.
Subsystem ID. The subsystem ID.
External PHY Firmware Version. The external PHY firmware version.
CONFIGURING ADAPTER PARAMETERS
Select the network adapter in the Explorer View pane, and then select the Configuration tab to configure adapter-level
parameters.
CONFIGURE MULTI-FUNCTION PARAMETERS USING THE WIZARD
Click Configure to configure multi-function parameters.