User guide

NetXtreme II User Guide
September 2013
Broadcom Corporation
Page 220 FCoE Boot from SAN Document INGSRVT78-CDUM100-R
VMWARE ESXI 5.1 FCOE BOOT INSTALLATION
FCoE Boot from SAN requires that the latest Broadcom NetXtreme II async drivers be included into the ESXi 5.1 install
image. Refer to
Image_builder_doc.pdf from VMware on how to slipstream drivers.
1. Boot from the updated ESXi 5.1 installation image and select ESXi 5.1 installer when prompted.
2. Press Enter to continue.
3. Press F11 to accept the agreement and continue.
4. Select the boot LUN for installation and press Enter to continue.