User guide

User Guide NetXtreme II
September 2013
Broadcom Corporation
Document INGSRVT78-CDUM100-R FCoE Boot from SAN Page 213
RHEL6 Installation
1. Boot from the installation medium.
2. For RHEL6.3, an updated Anaconda image is required for FCoE BFS. That updated image is provided by Red Hat at the
following URL http://rvykydal.fedorapeople.org/updates.823086-fcoe.img.
3. For RHEL6.3, on the installation splash screen, press Tab and add the options dd
updates=< URL_TO_ANACONDA_UPDATE_IMAGE > to the boot command line. Please refer to the RedHat
Installation Guide Section 28.1.3 (http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/
Installation_Guide/ap-admin-options.html#sn-boot-options-update) for details about installing the Anaconda update
image. Press Enter to proceed.
4. For RHEL6.4 and above, no updated Anaconda is required. On the installation splash screen press Tab and add the
option dd to the boot command line, as shown in the following screen. Press Enter to proceed.
5. When prompted Do you have a driver disk, enter Yes. Note: RHEL does not allow driver update media to be loaded
via the network when installing driver updates for network devices. Use local media.