User guide

NetXtreme II User Guide
September 2013
Broadcom Corporation
Page 190 Viewing or Changing the Properties of the Adapter Document INGSRVT78-CDUM100-R
VIEWING OR CHANGING THE PROPERTIES OF THE ADAPTER
To view or change the properties of the Broadcom network adapter
1. In Control Panel, click Broadcom Control Suite 4.
2. Click the Advanced section of the Configurations tab.
SETTING POWER MANAGEMENT OPTIONS
You can set power management options to allow the operating system to turn off the controller to save power or to allow the
controller to wake up the computer. If the device is busy doing something (servicing a call, for example) however, the
operating system will not shut down the device. The operating system attempts to shut down every possible device only
when the computer attempts to go into hibernation. To have the controller stay on at all times, do not click the Allow the
computer to turn off the device to save power check box.
NOTE: Power management options are not available on blade servers.