User guide

User Guide NetXtreme II
September 2013
Broadcom Corporation
Document INGSRVT78-CDUM100-RInstalling the Broadcom Advanced Control Suite and Related Management Applications Page 133
To perform a silent install from within a batch file
To perform a silent install from within a batch file and wait for the install to complete before continuing with the next command
line, type the following:
start /wait setup /s /w /v/qn
INSTALLING ON A LINUX SYSTEM
The Broadcom Advanced Control Suite (BACS) software can be installed on a Linux system using the Linux RPM package.
This installation includes a BACS GUI and a CLI client.
Before you begin:
• Ensure that the Broadcom network adapter(s) is physically installed and the appropriate device driver for the NICis is
installed on the system to be managed by this utility.
• Ensure that the CIM provider is installed properly on the system that is to be managed by this utility. See
• For managing iSCSI on Linux hosts, ensure that the open-iscsi and sg utilities are installed on the Linux host.
To install BACS
1. Download the latest BACS management application RPM package.
2. Install the RPM package using the following command:
% rpm -i BACS-{version}.{arch}.rpm
To Use BACS
• To use the GUI, on XWindow, double-click the BACS4 desktop icon, or access the BACS program from the task bar
under System Tools.
• To use BACS CLI, refer to the file BACSCLI_Readme.txt provided with the release files.
To remove BACS
To uninstall the RPM package, use the following command:
% rpm -e BACS