Owners Manual

iSCSI-Protokoll: Broadcom NetXtreme-II®Netzwerkadapter Benutzerhandbuch
file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/German/iscsi.htm[9/5/2014 3:49:06 PM]
29 Fehler
Target rejected an iSCSI PDU sent by the initiator. Dump data contains the rejected
PDU.
30 Fehler Initiator could not allocate a work item for processing a request.
31 Fehler Initiator could not allocate resource for processing a request.
32 Informationen
Initiator received an asynchronous logout message. The Target name is given in the
dump data.
33 Fehler
Challenge size given by the target exceeds the maximum specified in iSCSI
specification.
34 Informationen
A connection to the target was lost, but Initiator successfully reconnected to the target.
Dump data contains the target name.
35 Fehler
Target CHAP secret is smaller than the minimum size (12 bytes) required by the
specification.
36 Fehler
Initiator CHAP secret is smaller than the minimum size (12 bytes) required by the
specification. Dump data contains the given CHAP secret.
37 Fehler FIPS service could not be initialized. Persistent logons will not be processed.
38 Fehler Initiator requires CHAP for logon authentication, but target did not offer CHAP.
39 Fehler
Initiator sent a task management command to reset the target. The target name is
given in the dump data.
40 Fehler
Target requires logon authentication via CHAP, but Initiator is not configured to perform
CHAP.
41 Fehler Target did not send AuthMethod key during security negotiation phase.
42 Fehler
Target sent an invalid status sequence number for a connection. Dump data contains
Expected Status Sequence number followed by the given status sequence number.
43 Fehler Target failed to respond in time for a login request.
44 Fehler Target failed to respond in time for a logout request.
45 Fehler
Target failed to respond in time for a login request. This login request was for adding a
new connection to a session.
46 Fehler Target failed to respond in time for a SendTargets command.
47 Fehler Target failed to respond in time for a SCSI command sent through a WMI request.
48 Fehler Target failed to respond in time to a NOP request.
49 Fehler Target failed to respond in time to a Task Management request.
50 Fehler
Target failed to respond in time to a Text Command sent to renegotiate iSCSI
parameters.
51 Fehler
Target failed to respond in time to a logout request sent in response to an
asynchronous message from the target.
52 Fehler
Initiator Service failed to respond in time to a request to configure IPSec resources for
an iSCSI connection.
53 Fehler
Initiator Service failed to respond in time to a request to release IPSec resources
allocated for an iSCSI connection.
54 Fehler Initiator Service failed to respond in time to a request to encrypt or decrypt data.
55 Fehler Initiator failed to allocate resources to send data to target.
56 Fehler
Initiator could not map an user virtual address to kernel virtual address resulting in I/O
failure.
57 Fehler
Initiator could not allocate required resources for processing a request resulting in I/O
failure.
58 Fehler Initiator could not allocate a tag for processing a request resulting in I/O failure.
59 Fehler Target dropped the connection before the initiator could transition to Full Feature Phase.
60 Fehler
Target sent data in SCSI Response PDU instead of Data_IN PDU. Only Sense Data can
be sent in SCSI Response.
61 Fehler Target set DataPduInOrder to NO when initiator requested YES. Login will be failed.
62 Fehler
Target set DataSequenceInOrder to NO when initiator requested YES. Login will be
failed.
63 Fehler Cannot reset the target or LUN. Will attempt session recovery.
64 Informationen Attempt to bootstrap Windows using iSCSI NIC Boot (iBF).