Instruction Manual

October 2007 Page 7 Dell Enterprise Product Group
3. Unplugthesystemandsendittotheremotesitetobeinstalled.Thesystem
mustberemovedfromallA/Cinputforaperiodofatleast10secondsto
allowallcapacitancetodrainfromthesystemsoitresetstoitsdefaultstate.
Thesystemmustnot
bepoweredon,justconnectedtoA/CandtheWOL
enabledNICconnectedtotheactivenetwork.Thesystemisnowreadytobe
poweredonviaWOLwhenneeded.

4. Senda‘MagicPacket’wakeupsignaltotheMACaddressoftheWOL
enabledNIC,andthesystem
willboot.Out‐of‐BoxWOLcanonlybe
accomplishedviathe‘MagicPacket’WOLsignal.