Users Guide
Table Of Contents
- Table of Contents
- 1 Regulatory and Safety Approvals
- 2 Functional Description
- 3 Network Link and Activity Indication
- 4 Features
- 4.1 Software and Hardware Features
- 4.2 Virtualization Features
- 4.3 VXLAN
- 4.4 NVGRE/GRE/IP-in-IP/Geneve
- 4.5 Stateless Offloads
- 4.6 Priority Flow Control
- 4.7 Virtualization Offload
- 4.8 SR-IOV
- 4.9 Network Partitioning (NPAR)
- 4.10 Security
- 4.11 RDMA over Converged Ethernet – RoCE
- 4.12 VMWare Enhanced Networking Stack (ENS)
- 4.13 Supported Combinations
- 4.14 Unsupported Combinations
- 5 Installing the Hardware
- 6 Software Packages and Installation
- 7 Updating the Firmware
- 8 Link Aggregation
- 9 System-Level Configuration
- 10 PXE Boot
- 11 SR-IOV – Configuration and Use Case Examples
- 12 NPAR – Configuration and Use Case Example
- 13 Tunneling Configuration Examples
- 14 RoCE – Configuration and Use Case Examples
- 15 DCBX – Data Center Bridging
- 16 DPDK – Configuration and Use Case Examples
- Revision History
Broadcom NetXtreme-E-UG304-2CS
97
NetXtreme-E User Guide User Guide for Dell Platforms
for each partition are also accessible from this menu. For some OEM systems, the HII menu also includes a Global
Bandwidth Allocation page where the minimum (reserved) and maximum (limit) TX bandwidth for all partitions can be
configured.
4. Set the NIC Partition Configuration parameters (see Table 30).
Comprehensive Configuration Management v218.0.14.0
Copyright (C) 2000-2019 Broadcom Limited
All rights reserved.
NIC Configuraiton Menu
Number of Partitions Per Port : 4
PF#0 L2=B0:26:28:00:00:10(V)
PF#4 L2=B0:26:28:00:00:14(V)
PF#0 L2=B0:26:28:00:00:10(V)
PF#12 L2=B0:26:28:00:00:10(V)
Configure Number of Partitions Per Port (4 or 0 or 16) (Read Only)
[Enter];Enter New Value;[ĹĻ]:Next Entry; [ESC]:Quit
Current Adapter:Primary, Bus=33 Device=00 Func=00, MAC=BC:97:E1:D3:2B:40
Comprehensive Configuration Management v218.0.14.0
Copyright (C) 2000-2019 Broadcom Limited
All rights reserved.
PF# 0
Bandwidth Limit : 100
Bandwidth Limit Valid : False
RDMA Support : Enabled
Configure Maximum Limit in Percentage of Physical Bandwitdh (1..100)
[Enter];Enter New Value;[ĹĻ]:Next Entry; [ESC]:Quit
Current Adapter:Primary, Bus=33 Device=00 Func=00, MAC=BC:97:E1:D3:2B:40