Users Guide
Table Of Contents
- Table of Contents
- 1 Regulatory and Safety Approvals
- 2 Functional Description
- 3 Network Link and Activity Indication
- 4 Features
- 4.1 Software and Hardware Features
- 4.2 Virtualization Features
- 4.3 VXLAN
- 4.4 NVGRE/GRE/IP-in-IP/Geneve
- 4.5 Stateless Offloads
- 4.6 Priority Flow Control
- 4.7 Virtualization Offload
- 4.8 SR-IOV
- 4.9 Network Partitioning (NPAR)
- 4.10 Security
- 4.11 RDMA over Converged Ethernet – RoCE
- 4.12 VMWare Enhanced Networking Stack (ENS)
- 4.13 Supported Combinations
- 4.14 Unsupported Combinations
- 5 Installing the Hardware
- 6 Software Packages and Installation
- 7 Updating the Firmware
- 8 Link Aggregation
- 9 System-Level Configuration
- 10 PXE Boot
- 11 SR-IOV – Configuration and Use Case Examples
- 12 NPAR – Configuration and Use Case Example
- 13 Tunneling Configuration Examples
- 14 RoCE – Configuration and Use Case Examples
- 15 DCBX – Data Center Bridging
- 16 DPDK – Configuration and Use Case Examples
- Revision History
Broadcom NetXtreme-E-UG304-2CS
52
NetXtreme-E User Guide User Guide for Dell Platforms
9.1.2 Firmware Image Menu
This menu presents the various component versions present in the current firmware build. Depending on the adapter type,
some components may not be available. All fields in this menu are read-only.
Figure 24: Firmware Image Menu
This page displays the following information (see Figure 24):
Family Firmware Version – This field displays the family firmware version. This field may be displayed as Firmware
Bundle on some adapters.
Boot Code – This field displays the firmware boot code version.
MBA – This field displays the legacy pre-boot driver version.
EFI – This field displays the UEFI pre-boot driver version.
CCM – This field displays the Comprehensive Configuration Menu (CCM) version.
NC-SI – This field displays the NCSI firmware version.
RDMA FW –This field displays the RoCE firmware version.