Users Guide
Table Of Contents
- Table of Contents
- 1 Regulatory and Safety Approvals
- 2 Functional Description
- 3 Network Link and Activity Indication
- 4 Features
- 4.1 Software and Hardware Features
- 4.2 Virtualization Features
- 4.3 VXLAN
- 4.4 NVGRE/GRE/IP-in-IP/Geneve
- 4.5 Stateless Offloads
- 4.6 Priority Flow Control
- 4.7 Virtualization Offload
- 4.8 SR-IOV
- 4.9 Network Partitioning (NPAR)
- 4.10 Security
- 4.11 RDMA over Converged Ethernet – RoCE
- 4.12 VMWare Enhanced Networking Stack (ENS)
- 4.13 Supported Combinations
- 4.14 Unsupported Combinations
- 5 Installing the Hardware
- 6 Software Packages and Installation
- 7 Updating the Firmware
- 8 Link Aggregation
- 9 System-Level Configuration
- 10 PXE Boot
- 11 SR-IOV – Configuration and Use Case Examples
- 12 NPAR – Configuration and Use Case Example
- 13 Tunneling Configuration Examples
- 14 RoCE – Configuration and Use Case Examples
- 15 DCBX – Data Center Bridging
- 16 DPDK – Configuration and Use Case Examples
- Revision History
Broadcom NetXtreme-E-UG304-2CS
140
NetXtreme-E User Guide User Guide for Dell Platforms
Revision History
NetXtreme-E-UG304-2CS; March 23, 2021
Updated:
Figure 25, Device Configuration Menu
NetXtreme-E-UG303-2CS; February 10, 2021
Updated:
Supported Operating Systems
Added BCM957504-NGM250 to the functional description table.
System-Level Configuration
Auto-Negotiation Configuration
Added:
VMWare Enhanced Networking Stack (ENS)
NetXtreme-E-UG302-2CS; July 28, 2020
Updated:
Supported Operating Systems
NetXtreme-E-UG301-2CS; June 8, 2020
Updated:
Supported Operating Systems
Host Interface Features
Hardware Requirements
Installing the VMware Driver
Limitations
NetXtreme-E-UG300-2CS; February 20, 2020
Initial release