User's Manual

Dell™ Backup and Recovery Manager V1.3 Page 27
2. A default name for the recovery media is suggested. You may use it
(recommended) or type another name.
NOTE: The default program-generated name for the recovery media is
Recovery – xxxxxxxxxxxxxx where “xxxx …” is the recovery media
creation date and time code. In the screen below, 2010 is the year, 04, is the
month, 05 is the day, 15 is the hour based on the 24 hour clock, 29 is the
minutes past the hour, 47 is the number of seconds.
3. Select whether you want to include the factory image (recommended).
4. Choose where you
want to save the
recovery media,
Optical Media or
External Storage
Device, and then
select the device
from the drop-down
menu.
Click Refresh
adjacent to the drop-
down menu to clear
your selection or to
add a new external
storage device
attached after the
drop-down was
populated.
NOTE: For external storage devices, clicking Refresh will de-select a device
from the drop-down menu and refresh the list of available devices. If the
Next button was enabled, it will be disabled until you select a new device.
If you select an optical device from the drop-down menu and a blank disk was
found in the device, the Next button will be enabled. Otherwise you will be
asked to insert blank media in the drive. Click Refresh after the drive spins
up to enable the Next button.
4. Click Next.