User`s guide

Control panel overview
20
1. Introduction
7 Scan Switches to Scan mode.
8 Menu Opens Menu mode and scrolls through the
available menus.
9 Left/Right Arrows Scrolls through the options available in the
selected menu and increases or decreases
values.
10 OK Confirms the selection on the screen.
11 Back Sends you back to the upper menu level.
12 Start Starts a job.
13 Stop/Clear Stops an operations at any time.
14 Status LED Indicates the status of your machine (see
"Understanding the status LED" on page 92).
15 Numeric keypad Dials a number or enters alphanumeric
characters.
16 On Hook
Dial
When you press this button, you can hear a dial
tone. Then enter a fax number. It is similar to
making a call using speaker phone.
17 Redial/
Pause
Redials the last number in ready mode, or inserts
a pause(-) into a fax number in edit mode.
18 Address
Book
Allows you to store frequently used fax numbers
or search for stored fax numbers.
19 Display screen Shows the current status and displays prompts
during an operation.