Users Guide
Table Of Contents
- Alienware Mobile Connect 3.x for iOS User's Guide
- Contents
- Introduction
- Setting up Alienware Mobile Connect
- Using Alienware Mobile Connect
- Troubleshooting
Start the screen mirroring
Steps
1. Click or tap the Mirroring icon on the Alienware Mobile Connect application.
The mirroring option is displayed on the Alienware Mobile Connect iPhone app.
2. Go to the Alienware Mobile Connect iPhone app and tap the Mirroring button.
The broadcast screen of your iPhone is displayed to mirror the device.
3. Select Mobile Connect.
4. Click or tap Start Broadcast.
Screen mirroring is initiated.
Stop the screen mirroring
You can stop the screen mirroring by clicking or tapping the Mirroring icon on Alienware Mobile Connect. You can also click or tap
the Mirroring button in the Alienware Mobile Connect iPhone app, and click or tap Stop Broadcast on the Broadcast menu.
Click or tap the red clock on the upper area of your iPhone to open a message box that enables you to stop the screen mirroring.
Unlock your iPhone using screen mirroring
You can use your computer keyboard to enter the pin to unlock your phone. The virtual keyboard is not displayed on the iPhone due
to the on-going screen mirroring session.
Use the mouse pointer on your iPhone when mirroring
You can also click or tap the mouse pointer icon on the Alienware Mobile Connect application to view the instructions on how to use
the mouse pointer when mirroring.
Steps
1. Go to Settings in your iPhone,
2. Enable AssistiveTouch and adjust the opacity to decrease or increase the visibility of AssistiveTouch when it is not in use.
The AssistiveTouch icon is now activated on your iPhone screen.
NOTE: If your screen is being mirrored, you can see a mouse pointer instead of the AssistiveTouch icon.
3. Enable Show Onscreen Keyboard in the AssistiveTouch settings page.
NOTE: This option must be enabled to display the virtual keyboard.
4. Disable Always Show Menu.
NOTE: Disabling this option ensures that only the mouse pointer is visible during screen mirroring and the AssistiveTouch
icon is disabled.
5. Set TRACKING SPEED to minimum
NOTE: This option helps to synchronize the mouse pointer of your computer and the mouse pointer on the iPhone screen.
Do not disturb
You can deactivate the screen notifications using the Do not disturb icon.
Enable Do not disturb option
1. Click or tap the Do not disturb icon.
30