Service Manual

Removing the camera
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the wireless card.
3 Remove the display assembly.
4 Remove the display bezel.
Procedure
NOTE: Ensure that the display assembly is placed on a clean and at surface.
1 Open the latch and disconnect the camera cable from the camera.
2 Peel the camera from the display assembly.
71