Service Manual

Table 4. System setup options—Advanced menu
Advanced
Intel(R) SpeedStep(TM) Enables you to enable or disable Intel Speedstep
Technology.
Default: Enabled
NOTE: If enabled, the processor clock speed and core
voltage are adjusted dynamically based on the
processor load.
Integrated NIC Enables you to enable or disable the on-board LAN
controller.
Default: Enabled
USB Emulation Enables you to enable or disable the USB emulation feature.
This feature denes how the BIOS, in the absence of a USB-
aware operating system, handles USB devices. USB
emulation is always enabled during POST.
Default: Enabled
NOTE: You cannot boot any type of USB device
(oppy, hard drive, or memory key) when this option
is o.
USB Powershare Enables you to charge USB devices when the computer is
turned o or in standby mode.
Default: Enabled
USB Wake Support Enables you to enable the USB devices to wake the
computer from Standby.
Default: Disabled
NOTE: If USB PowerShare is enabled, a device
connected to the USB PowerShare connector may not
wake the computer.
Sleep Mode Enable or disable sleep mode.
Intel Speed Shift Technology Enable/disable Intel Speed Shift Technology support.
Setting this option to enable to allows the operating system
to select the appropriate processor performance
automatically.
Default: Enabled
SATA Operation Enables you to congure the operating mode of the
integrated SATA hard drive controller.
Default: AHCI
Adapter Warnings Ebales you to choose if the computer should display warning
messages when you use AC adapters that are not supported
by your computer.
Default: Enabled
Function Key Behavior Enables you to set function key or multimedia key as the
default function key behavior.
Default: Function key
Express Charge Enables you to charge your computer battery using
Standard Charge or Express Charge mode.
Default: Express Charge
Battery Health Displays the battery health.
Intel(R) Software Guard Extensions Enable or disable Intel Software Guard Extensions.
103