Service Manual
Table Of Contents
- Alienware m15 R4 Service Manual
- Working inside your computer
- Removing and installing components
- Recommended tools
- Screw list
- Major components of Alienware m15 R4
- Base cover
- Battery
- M.2 solid-state drive
- M.2 2230 WWAN/solid-state drive
- Rear-I/O cover
- Display assembly
- Speakers
- Touchpad
- Keyboard-controller board
- Right I/O-board
- System board
- Left I/O-board
- Fan and heat-sink assembly
- Power-adapter port
- Power-button assembly
- Keyboard
- Palmrest
- Drivers and downloads
- System setup
- Troubleshooting
- Getting help and contacting Alienware
5. Remove the M.2 2280 solid-state drive, if applicable.
6. Remove the rear I/O-cover.
7. Remove the speakers.
8. Remove the right I/O-board.
9. Follow the procedure from step 1 to step 19 in
Removing the system board.
10.Remove the power-adapter port.
About this task
NOTE: This procedure is only applicable for computers shipped with a mechanical keyboard.
The following image(s) indicate the location of the keyboard and provides a visual representation of the removal procedure.
66