Service Manual

Steps

1. Disconnect all the cables connected to the system board.

NOTE: Note the routing of all cables as you remove them so that you can route them correctly after you replace the

system board. For information on system-board connectors, see "system-board components".

2. Remove the eight screws (#6-32) that secure the system-board assembly to the chassis.

3. Lift the system board off the chassis.

Installing the system board

Prerequisites

Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove.

About this task

The following images indicate the location of the system board and provides a visual representation of the installation procedure.