Service Manual

Steps

1. Ensure that the release lever on the processor socket is fully extended and the processor cover is fully open.

CAUTION: Position the processor correctly in the processor socket to avoid permanent damage to the processor.

2. Align the pin-1 corner on the processor with the pin-1 corner on the processor socket, and then place the processor in the

processor socket.

CAUTION: Ensure that the processor-cover notch is positioned underneath the alignment post.

3. When the processor is fully seated in the socket, close the processor cover.

4. Pivot the release lever down and place it under the tab on the processor cover.

Next steps

1. Install the processor liquid-cooling assembly or processor fan and heat-sink assembly, as applicable.

2. Install the left-side cover.

3. Follow the procedure in After working inside your computer.

Brezžična kartica

Odstranjevanje brezžične kartice

Zahteve

1. Upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika.

2. Odstranite levi pokrov.

3. Odstranite enojno grafično kartico ali dvojno grafično kartico, kot je ustrezno.

O tem opravilu

Spodnje slike prikazujejo, kje je brezžična kartica, in prikazujejo postopek odstranitve.