Service Manual

2. Zaskočne vijake na sklopu hladilnika procesorja poravnajte z odprtinami za vijake na sistemski plošči.
3. Po vrsti privijte štiri zaskočne vijake, s katerimi je sklop ventilatorja in hladilnika procesorja pritrjen na sistemsko ploščo.
4. Kabel ventilatorja procesorja priključite na sistemsko ploščo.
5. Zavrtite ohišje napajalnika proti ohišju računalnika.
6. Zaklepe za sprostitev ohišja napajalnika potisnite proti zaklenjenemu položaju.
Naslednji koraki
1. Namestite levi pokrov.
2. Upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika.
Procesor
Removing the processor
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
3. Remove the processor liquid-cooling assembly or processor fan and heat-sink assembly, as applicable.
About this task
The following images indicate the location of the processor and provides a visual representation of the removal procedure.
Steps
1. Press the release lever down and then push it away from the processor to release it from the tab.
2. Extend the release lever completely and open the processor cover.
3. Lift the processor off the processor socket.
Installing the processor
Prerequisites
Če opravljate zamenjavo komponente, odstranite obstoječo komponento, preden začnete postopek namestitve nove.
About this task
The following images indicate the location of the processor and provides a visual representation of the installation procedure.
72