Service Manual

Security
HDD Password Status Displays if the hard drive password is set.
Admin Password Displays the admin password.
System Password Displays the system password.
HDD Password Displays the hard drive password.
Firmware TPM Displays the firmware TPM.
Table 7. System setup options—Boot menu
Boot
Boot List Option Displays the available boot devices.
File Browser Add Boot Option Allows you to set the boot path in the boot option list.
File Browser Del Boot Option Allows you to delete the boot path in the boot option list.
Secure Boot Control Allows you to enable or disable the secure boot control.
Load Legacy OPROM Allows you to enable or disable the Legacy Option ROM.
Boot Option Priorities Displays the available boot devices.
Boot Option #1 Displays the first boot device. Default: UEFI: Windows Boot
Manager.
Boot Option #2 Displays the second boot device. Default: Onboard NIC
Device.
Boot Option #3 Displays the third boot device. Default: Onboard NIC
Device.
Table 8. System setup options—Exit menu
Save & Exit
Save Changes and Reset Allows you to exit system setup and save your changes.
Discard Changes and Reset Allows you to exit system setup and load previous values
for all system setup options.
Restore Defaults Allows you to load default values for all system setup
options.
Discard Changes Allows you to exit your changes.
Save Changes Allows you to save your changes.
Clearing CMOS settings
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
About this task
The following images indicate the location of the CMOS jumper and provide a visual representation of the clearing CMOS
procedure.
99