Service Manual
Table Of Contents
- Alienware Aurora R9 Service Manual
- Working inside your computer
- Removing and installing components
- Inside view of your computer
- System-board components
- Recommended tools
- Screw list
- Left-side cover
- Top cover
- Right-side cover
- 2.5-inch hard drive
- 3.5-inch hard drive
- 2.5-inch hard-drive cage
- 3.5-inch hard-drive cage
- 460 W power-supply unit
- 850 W Power-supply unit
- Right tron-light board
- Processor liquid-cooling assembly
- Coin-cell battery
- Memory modules
- Solid-state drive
- Single-graphics card
- Dual-graphics card
- Front bezel
- Top bezel
- Bottom cover
- Processor fan and heat-sink assembly
- Processor
- Wireless card
- Antennas
- Front I/O-panel
- Front-chassis fan
- Top-chassis fan
- Power-button board
- System board
- Device drivers
- System setup
- Troubleshooting
Advanced
BIOS Recovery from Hard Drive Allows you to enable or disable BIOS Recovery from hard drive.
USB Configuration
Front USB Ports Allows you to enable or disable the front USB ports.
Rear USB Ports Allows you to enable or disable the rear USB ports.
Power Options
Numlock Key Allows you to set the status of the Num Lock key during boot to
On or Off.
Wake Up by Integrated LAN Allow the computer to be powered on by special LAN signals.
AC Recovery Sets what action the computer takes when power is restored.
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
USB Wake Support (S3) Allows you to enable the USB devices to wake the system from
Standby.
USB PowerShare (S4/S5) Allows you to charge external devices.
USB PowerShare Wake Support (S4/S5) Allows you to enable front the USB devices to wake the system
from S4/S5.
Auto Power On
Auto Power On Mode Allows you to set the computer to turn on automatically every
day or on a preselected date. This option can be configured only
if the Auto Power On mode is set to Enabled Everyday or
Selected Day.
Auto Power On Date Allows you to set the date on which the computer must turn on
automatically. This option can be configured only if the Auto
Power On mode is set to Enabled 1 to 31.
Auto Power On Time Allows you to set the time at which the computer must turn on
automatically. This option can be configured only if the Auto
Power On mode is set to Enabled hh:mm:ss.
Performance Options
Overclocking Feature
Core Over Clocking Level Allows you enable or disable the OC level1/level2 setting and
adjust the processor flex ratio and voltage in the Customization
mode.
Computrace Allows you to enable or disable the Computrace service using
the Absolute software.
Core Ratio Limit Override Allows you to set the core ratio limit.
Single Core Allows you to select single core or multiple cores.
Core Voltage Mode Allows you to select between adaptive and override voltage
modes.
Core Voltage Offset Allows you to set the override value of core voltage.
Long Duration PWR Limit Allows you to set the turbo mode power limit.
Short Duration PWR Limit Options Allows you to set the turbo mode power limit.
XMP Memory Allows you to set the XMP memory.
Table 6. System setup options—Security menu
Security
Admin Password Status Displays whether the admin password is set.
System Password Status Displays whether the system password is set.
98