Setup Guide

Figure 10. Connecting the cables
1
solid-state drive slot 2 screw
3 data cable 4 solid-state drive adapter
5 power cable 6 fan cable
20 Align the graphics card with the slot on the system board.
21 Place the graphics card into the slot and press down rmly until the graphics card snaps into place.
22 Connect the power cables to the graphics card.
23 Slide the tab on the graphics-card bracket into the slot on the chassis and snap it into place.
24 Rotate the power-supply unit cage towards the chassis until the unit snaps into place.
25 Connect the power cable to the U.2 solid-state drive.
Installing the U.2 solid-state drive
13