Service Manual

3 Insert the memory module into the memory-module slot and press the memory module down until it snaps into position

and the securing clips lock in place.

Figure 31. Replacing the memory module

1 memory module 2 securing clips (2)

3 memory-module slot 4 system board

NOTE: Use slots XMM1 and XMM2 if you need to use two memory modules. For more information, see System-

board components.

The following table lists the available memory conguration matrix:

Table 2. Memory conguration matrix

Conguration

Slot

DIMM1 DIMM2 DIMM3 DIMM4

8 GB DDR4 8 GB

16 GB DDR4 8 GB 8 GB

32 GB DDR4 16 GB 16 GB

64 GB DDR4 16 GB 16 GB 16 GB 16 GB

8 GB XMP 8 GB

16 GB XMP 8 GB 8 GB

32 GB XMP 16 GB 16 GB

64 GB XMP 16 GB 16 GB 16 GB 16 GB

Post-requisites

1 Follow the procedure from step 10 to step 11 in "Replacing the power-supply unit".