Service Manual

Removing the hard-drive cage
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the left-side cover.
2 Remove the 3.5-inch hard drive.
Procedure
1 Remove the screws that secure the hard-drive cage to the chassis.
2 Lift the hard-drive cage o the chassis.
Figure 22. Removing hard-drive cage
1 chassis 2 #6-32x1/4'' screws (2)
3 hard-drive cage
41