Service Manual

Replacing the top-cover assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Align the tabs on the top cover with the slots on the top bezel and snap the top cover into place.
2 Slide the lighting cable through the slot on the chassis.
3 Align the tabs on the top cover with the slots on the chassis and snap the top cover into place.
4 Connect the lighting cable to the top cover.
5 Replace the screws that secure the top cover to the chassis.
Post-requisites
1 Replace the right-side cover.
2 Replace the left-side cover.
26