Specifications

Intel Optane memory

Intel Optane memory functions as a storage accelerator. It accelerates the system and any type of SATA-based storage media such as

hard drives and solid-state drives (SSDs).

NOTE: Intel Optane memory is supported on computers that meet the following requirements:

• 7

generation Intel Core i3/i5/i7 processor or higher

• Windows 10 64-bit version or higher (Anniversary Update)

• Intel Rapid Storage Technology driver version 15.5.xxxx or higher

Table 6. Intel Optane memory

Interface PCIe NVMe 3.0 x2

Connector M.2

Configurations supported 16 GB and 32 GB

NOTE: For more information about enabling or disabling the Intel Optane memory, see Enabling Intel Optane memory or

Disabling Intel Optane memory.

Ports and connectors

Table 7. Ports and connectors on the back panel

Back panel:

Network One RJ45 port

USB

• Six USB 2.0 ports

• One USB 3.1 Gen 2 Type-C port

• One USB 3.1 Gen 2 Type-A port

• Three USB 3.1 Gen 1 ports

Audio

• One audio input/microphone port

• One optical S/PDIF port

• One coaxial S/PDIF port

• One front L/R surround line-out port

• One side L/R surround port

• One rear L/R surround port

• One center/subwoofer LFE surround port

• One line-in port

Video One DisplayPort - optional

NOTE: The DisplayPort on the back panel of your computer is covered.

Connect the display to the discrete graphics card of your computer.

Table 8. Ports and connectors on the front panel

Front panel:

USB

• Two USB 3.1 Gen 1 ports

• Two USB 3.1 Gen 1 ports with PowerShare

Audio

• One audio output/headphone port (supports 2 channel audio)

• One audio input/microphone port

Communications

Table 9. Supported Communications

Ethernet 10/100/1000 Mbps Killer E2400 Ethernet controller integrated on system board