Service Manual

Advanced

Core Ratio Limit Override Allows you to set the core ratio limit.

Single Core Allows you to select single core or multiple cores.

Core Voltage Mode Allows you to select between adaptive and override voltage

modes.

Core Voltage Offset Allows you to set the override value of core voltage.

Long Duration PWR Limit Allows you to set the turbo mode power limit.

Short Duration PWR Limit Options Allows you to set the turbo mode power limit.

XMP Memory Allows you to set the XMP memory.

Table 6. System setup options—Security menu

Security

Admin Password Status Displays whether the admin password is set.

System Password Status Displays whether the system password is set.

HDD Password Status Displays if the hard drive password is set.

Admin Password Displays the admin password.

System Password Displays the system password.

HDD Password Displays the hard drive password.

Firmware TPM Displays the firmware TPM.

Table 7. System setup options—Boot menu

Boot

Boot List Option Displays the available boot devices.

File Browser Add Boot Option Allows you to set the boot path in the boot option list.

File Browser Del Boot Option Allows you to delete the boot path in the boot option list.

Secure Boot Control Allows you to enable or disable the secure boot control.

Load Legacy OPROM Allows you to enable or disable the Legacy Option ROM.

Boot Option Priorities Displays the available boot devices.

Boot Option #1 Displays the first boot device. Default: UEFI: Windows Boot

Manager.

Boot Option #2 Displays the second boot device. Default: Onboard NIC

Device.

Boot Option #3 Displays the third boot device. Default: Onboard NIC

Device.

Table 8. System setup options—Exit menu

Save & Exit

Save Changes and Reset Allows you to exit system setup and save your changes.

Discard Changes and Reset Allows you to exit system setup and load previous values for

all system setup options.

Restore Defaults Allows you to load default values for all system setup

options.

Discard Changes Allows you to exit your changes.

Save Changes Allows you to save your changes.