Service Manual

Advanced
Intel SpeedStep Allows you to enable or disable Intel Speedstep Technology.
Default: Enabled.
NOTE: If enabled, the processor clock speed and core
voltage are adjusted dynamically based on the processor
load.
Virtualization Allows you to enable or disable Intel Virtualization Technology
feature for the processor.
VT for Direct I/O Allows you to enable or disable Intel Virtualization Technology
feature for the Direct I/O.
SATA Operation Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Intel Ready Mode Technology Allows you to enable or disable the Intel Ready Mode
Technology.
Intel Software Guard Extensions Allows you to enable or disable Intel Software Guard Extensions.
BIOS Recovery from Hard Drive Allows you to enable or disable BIOS Recovery from hard drive.
USB Configuration
Front USB Ports Allows you to enable or disable the front USB ports.
Rear USB Ports Allows you to enable or disable the rear USB ports.
Power Options
Numlock Key Allows you to set the status of the Num Lock key during boot to
On or Off.
Wake Up by Integrated LAN Allow the computer to be powered on by special LAN signals.
AC Recovery Sets what action the computer takes when power is restored.
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
USB Wake Support (S3) Allows you to enable the USB devices to wake the system from
Standby.
USB PowerShare (S4/S5) Allows you to charge external devices.
USB PowerShare Wake Support (S4/S5) Allows you to enable front the USB devices to wake the system
from S4/S5.
Auto Power On
Auto Power On Mode Allows you to set the computer to turn on automatically every
day or on a preselected date. This option can be configured only
if the Auto Power On mode is set to Enabled Everyday or
Selected Day.
Auto Power On Date Allows you to set the date on which the computer must turn on
automatically. This option can be configured only if the Auto
Power On mode is set to Enabled 1 to 31.
Auto Power On Time Allows you to set the time at which the computer must turn on
automatically. This option can be configured only if the Auto
Power On mode is set to Enabled hh:mm:ss.
Performance Options
Overclocking Feature
Core Over Clocking Level Allows you enable or disable the OC level1/level2 setting and
adjust the processor flex ratio and voltage in the Customization
mode.
Computrace Allows you to enable or disable the Computrace service using the
Absolute software.
96