Service Manual

Removing the rear trim cover

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Prerequisites

1. Remove the

left-side cover.

2. Remove the right-side cover.

3. Remove the top cover.

Procedure

1. Place the computer in an upright position.

2. Using the tab, slide and remove the rear trim cover from the chassis.

a. chassis

b. rear trim cover