Service Manual

Replacing the front bezel

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Procedure

1. Align and insert the front bezel tabs into the front panel slots.

2. Rotate the front bezel towards the chassis until the front bezel tabs snap into place.

Post-requisites

1. Replace the

top cover.

2. Follow the procedure from step 4 to step 5 in "Replacing the optical drive".

3. Replace the right-side cover.

4. Replace the left-side cover.