Service Manual

Removing the front bezel

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Prerequisites

1. Remove the

left-side cover.

2. Remove the right-side cover.

3. Follow the procedure from step 1 to step 3 in "Removing the optical drive".

4. Remove the top cover.

Procedure

1. Place the computer in an upright position.

2. Grasp and release the front bezel tabs sequentially from the top, by moving them outward from the front panel.

a. front bezel

b. chassis

c. tabs

3. Rotate and pull the front bezel away from the front of the chassis to release the tabs on the front bezel from the slots on the front

panel.