Service Manual

Replacing the antenna

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Procedure

1. Adhere the antenna to the chassis.

2. Route the antenna cables through the routing guides on the chassis and slide the cables through the cable-routing slot on the

chassis.

3. Route the antenna cables through the routing guides inside the chassis.

Post-requisites

1. Follow the procedure from step 1 to step 3 in “

Replacing the wireless card”.

2. Replace the top cover.

3. Replace the

right-side cover.

4. Replace the left-side cover.