Service Manual

7. Disconnect the processor-power cable and system-board power cable from the system board.

1. power-supply unit 2. hard-drive power cable

3. graphics-card power cables (2) 4. releasing clips (2)

5. hard-drive power cable 6. processor-power cable

7. optical-drive power cable 8. system-board power cable

8. Rotate the power-supply unit cage towards the chassis until the unit snaps into place.

9. Remove the screws that secure the power-supply unit bracket to the power-supply unit cage.

10.Lift the power-supply unit bracket off the power-supply unit cage.

chassis 2. screws (2)

3. power-supply unit bracket 4. power-supply unit

11. Remove the screws that secure the power-supply unit to the chassis.