Service Manual

Replacing the hard-drive cage

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Procedure

1. Insert the hard-drive cage into its slot on the chassis.

2. Align the tabs on the cage with the tabs on the chassis.

3. Replace the screws that secure the hard-drive cage to the chassis.

Post-requisites

1. Replace the

3.5-inch hard drive.

2. Replace the left-side cover.