Service Manual

Replacing the top-cover assembly

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Procedure

1. Align the tabs on the top cover with the slots on the top bezel and snap the top cover into place.

2. Slide the lighting cable through the slot on the chassis.

3. Align the tabs on the top cover with the slots on the chassis and snap the top cover into place.

4. Connect the lighting cable to the top cover.

5. Replace the screws that secure the top cover to the chassis.

Post-requisites

1. Replace the

right-side cover.

2. Replace the

left-side cover.