Service Manual

Replacing the bottom cover

WARNING: Before working inside your computer, read the

safety information that shipped with your computer and

follow the steps in

Before working inside your computer.

After working inside your computer, follow the instructions

in After working inside your computer. For more safety best

practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Procedure

1 Tilt the computer towards the front until the base is facing up.

2 Align the tabs on the bottom cover with the slots on the chassis and snap

the bottom cover to lock it in place.

3 Turn the computer over and place it in upright position.

Post-requisites

Replace the left-side cover.