Service Manual

Steps

1. Place the card into the X16 slot and press down firmly until the graphics card snaps into place.

2. Connect the power cables to the graphics card.

3. Slide the tab on the graphics-card bracket into the slot on the chassis and rotate it into place.

4. Rotate the power-supply unit cage towards the chassis.

5. Connect the power cables to the graphics card.

6. Slide the power-supply unit cage release latches towards the locked position.

Next steps

1. Install the

left-side cover.

2. Follow the procedure in After working inside your computer.

Dual-graphics card

Removing the dual-graphics card

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the left-side cover.