Service Manual

Removing the wireless card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the stability foot.
2 Remove the left and right side-panels. See “Removing the side panels”.
3 If you have multiple graphics cards installed, remove the graphics card. See “Removing multiple graphics cards”.
Procedure
1 Lay the chassis on the right side.
2 Locate the wireless card on the system board.
3 Remove the screw (M2x3) that secures the wireless card to the chassis.
4 Slide and remove the wireless card from the wireless-card slot.
5 Disconnect the antenna cables from the wireless card.
66